C-Band 5.0~6.0 GHz Microwave RF Ferrite Microstrip Dual-Junction Circulator

• Customization: Available
• Type: Typical
• Description: Accept Customization
• Model NO.: HMDHA50T60G
• Isolation(dB)Min: 18.0/30.0
• Mounting Type: Gold Wrie Bonding/Lap Welding
• Frequency(GHz): 5.0~6.0
• Direction: Clockwise
• Series: Mircrostrip
• Vswr Max: 1.35
• Insertion Loss(dB)Max: 0.5/0.9
• Cw: 15
• Bandwidth: Full
• Reverse Power: 5
• Features: H Type
• Pk: 30
• Application: Dual-Junction Circulator
• Trademark: HzBeat
• Origin: Sichuan, China
• Production Capacity: 10000 Piece/Pieces Per Week

Product Description

Products Description

Product differentiation

Through the two charts below, you can get a rough understanding of the differences in size, power, and Electrical performance of
different product types. It also demonstrates the frequency range that different types of products are suitable to cover.

Criteria	Microstrip	Drop-in	Coaxial	Waveguide
Volume Size	Smaller	Medium	Larger	Largest
Power Handling	Lower	Medium	Medium	Highest
Electrical Performance	Lower	Higher	Higher	Highest

*Note: The comparison of Electrical performance is based on the same frequency range and frequency conditions.

Product Type	Frequency Range Representation
Microstrip	S, C, X, Ku, K, Ka
Drop-in	VHF, UHF, L, S, C, X, Ku
Coaxial	VHF, UHF, L, S, C, X, Ku
Waveguide	C, X, Ku, K, Ka, V, W

*Note: that the evaluations in the table are still based on general comparisons, and the specific circumstances and performance may vary depending on design requirements, materials used, and other factors.

Product Paramenters

Performance Parameters Table Product Overview

This is a C-band Microstrip Dual-Junction Circulator. As shown in the diagram, the circuit is arranged diagonally to narrow the signal transmission channel width. However, it results in longer signal transmission distances and some sacrifices in terms of loss. This kind of solution can be customized based on your requirements to achieve a narrower signal transmission channel width.

Model

Frequency (GHz)

BW Max

Insertion loss(dB) Max

Isolation (dB)Min

VSWR Max

Operating temperature ( )

PK/CW/RP (Watt)

Direction

HMDHA50T60G

5.0~6.0

FULL

0.5(P1-P2)

18.0(P2-P1)

1.35

-55~+85

30/15/5

Clockwise

0.9(P2-P3)

30.0(P3-P2)

HMDHB50T60G

5.0~6.0

FULL

0.5(P1-P2)

18.0(P2-P1)

1.35

-55~+85

30/15/5

Counter Clockwise

0.9(P2-P3)

30.0(P3-P2)

*() inside is the limit temperature index,The detailed product data is subject to the technical specification sheet.

Our Advantages

Custom Service

As an innovative manufacturer of RF passive components, Hzbeat has own R&D team to design the components as the client's······

Excellent Quality

All RF passive components from Hzbeat are 100% tested before delivery and have 3 years quality warranty.

Factory Price

As the manufacturer of RF passive component, the offer for the clients are very competitive on the base of lower production······

Professional Service

HzBeat has over 100 employees(including over 20 professional technical personnel).

Company Profile

About Us:

Chengdu HzBeat Electronic Technology Co, Ltd (Abbreviated as HzBeat) is a high-tech firm specialized in manufacturing microwave products. Covering 5000 , HzBeat has over 100 employees(including over 20 professional technical personnel).

 

HzBeat's microwave products cover the frequency ranging from 20MHz to 200GHz. Our products are widely used in applications such as wireless communication base station, repeater, RF circuit, T/R module, cavity filter, radar, GPS, disaster control unit, satellite TV, etc. For years, HzBeat Electronic has been servicing some of the most well-known telecommunication giants, as well as some of the national key projects.

Production Environment

HzBeat is focused on providing customers with high quality, cost effective, specialized, and customized products. We embrace the quality-oriented and service-oriented principle, always serves our customers with best solutions and products designing to delivering.

 

Substrate Processing

Our company takes the lead in adopting advanced processing methods in the industry to ensure efficient production of high-precision and highly consistent ferrite substrates.

Production facility

We utilize high-temperature and low-temperature test chambers, sintering furnaces, advanced automated production processes, and sophisticated testing methods to ensure the high precision, reliability, and consistency of our products.

Assembly and Testing

We have a highly skilled workforce, well-established production processes, advanced assembly and testing methods, and a robust quality assurance management system in place. This enables us to meet the demands of efficient and large-scale production with high efficiency and batch consistency.

Product Testing

During the production process, the product undergoes adhesive strength tensile testing to assess the reliability of the circuit, as well as X-ray inspection to analyze the void ratio of the product.Electrical performance testing is conducted under extreme high temperature, room temperature, and extreme low temperature conditions. Additionally, temperature shock experiments are performed to evaluate the overall reliability of the product. These tests ensure that the product meets the specified requirements outlined in the specification sheet before it is released from the factory.

Custom Design

Contact us , and our engineers will customize a suitable solution based on your requirements. We will also offer discounted pricing and provide FOB quotations.

 

The relative advantages of Microstrip circulators and isolators are small size, light weight, small spatial discontinuity when integrated with microstrip circuits, and easy 50Ω bridge connection (high connection reliability). Its relative disadvantages are low power capacity and poor immunity to electromagnetic interference.

Frequency range: 2GHz-40GHz. The relative advantages of Drop-in/Coaxial  isolator and circulator are small size, light weight and easyb installation.

Frequency range: 50MHz-40GHz. The relative advantages of Waveguide devices are low loss, high power handling capacity, and high operating frequency. However, their relative disadvantage is the larger size due to flange-related issues of the waveguide interface.

Frequency range: 2GHz-180GHz.

 

We will provide Low insertion loss, high isolation, high power handling on RF Module. Exceptional customer service and technicalsupport are on hand to support our customers.

Determine The Plan

A.Analyze and formulate a plan.

Communicate with us regarding the customization of the product, including frequency bands, specification requirements, power needs, and size constraints. We will conduct an initial feasibility assessment.

B.Finalize product specifications.

Present the product technical specifications based on the agreed-upon plan and obtain mutual confirmation.

C.Submit a specification and quotation, and sign the contract.

Provide a detailed price quote for the products, and upon mutual confirmation of the customized product models and pricing, sign the purchase order.

Design For Production

A.Modeling and simulation, and then creating prototypes.

Customize the product, perform modeling and simulations. After achieving the desired technical specifications through simulations, produce physical prototypes, and conduct physical tests. Finally, confirm the product's technical readiness.

B.Reliability Testing

Conduct reliability testing on materials and product processes to ensure that aspects like adhesion and tensile strength are experimentally verified for each batch of products.

C.Batch Production

After confirming the final technical status of the product, a list of materials for batch production is prepared, and the assembly
process for bulk production begins.

Inspection And Testing

A.Extreme Temperature Electrical Performance Testing.

After completing product manufacturing, the electrical performance indicators are tested at low temperature, room temperature, and high temperature.

B.Inspecting tolerances and appearance.

Inspecting the product for scratches and checking if the dimensions meet the specifications.

C.Product Reliability Testing.

Conducting temperature shock and random vibration tests before shipment as per customer requirements.

 

Packaging And Shipping

Deliver the product

Place the products orderly into the packaging box, vacuum seal using vacuum bags, provide Hzbeat product certificate and product
testing report, pack into the shipping box, and arrange for shipment.

FAQ

Q1: Are you a factory or a trade company?
A1: HzBeat is a factory specialised in RF components.
Q2: Where is your location?
A2: We are in ChengDu.
Q3: How many years have you engaged in this business?
A3: We have engaged in this business more than 10 years, and we are professional in RF Isolator/Circulator, and other RF components.
Q4: How long is your delivery time(lead time)?
A4: Within 3 days if the product is in stock.
Q5: What's the MOQ (Minimum Order Quantity)?
A5: Generally speaking 10pcs, but it depends on models.
Q6: How many workers do you have?
A6: Over 200.
Q7: Why choose HzBeat?
A8: 1. Have a professional R & D technical team.
2. Perfect product quality management system.
3. Professional production and testing
4. Professional after-sales Technical Service.