RF 0.2GHz to 0.6GHz Coaxial Circulator

• Customization: Available
• Insertion Loss(dB)Max: 0.4
• Isolation(dB)Min: 20.0
• Model NO.: HCCTA02T06G
• connector: N-K
• Specification: 62*62(mm)
• Production Capacity: 10000 Pieces/Month

Product Description

Product description:



0.05 GHz to 40.0 GHz Coaxial circulator 

Coaxial circulator
Number	Wave band	Model	Frequency(GHz)	BW Max	Insertion loss(dB) Max	Isolation(dB)Max	VSWR Max	Direction	Size(mm)	Connector	Operating temperature(ºC)
1	VHF-P	HCCTA01T04G	0.1~0.4	10%	0.4	20	1.2	clockwise	100*100	SMA-K	-55~+85ºC
2		HCCTB01T04G	0.1~0.4	10%	0.4	20	1.2	Counter Clockwise	100*100	SMA-K	-55~+85ºC
3		HCCTA01T04G	0.1~0.4	40%	0.6	15	1.5	clockwise	100*100	SMA-K	-55~+85ºC
4		HCCTB01T04G	0.1~0.4	40%	0.6	15	1.5	Counter Clockwise	100*100	SMA-K	-55~+85ºC
5		HCCTA02T06G	0.2~0.6	10%	0.4	20	1.2	clockwise	62*62	N-K	-55~+85ºC
6		HCCTB02T06G	0.2~0.6	10%	0.4	20	1.2	Counter Clockwise	62*62	N-K	-55~+85ºC
7		HCCTA02T06G	0.2~0.6	10%	0.4	20	1.2	clockwise	62*62	SMA-K	-55~+85ºC
8		HCCTB02T06G	0.2~0.6	10%	0.4	20	1.2	Counter Clockwise	62*62	SMA-K	-55~+85ºC
9	P	HCCTA03T06G	0.3~0.6	40%	0.6	15	1.5	clockwise	62*62	SMA-K	-55~+85ºC
10		HCCTB03T06G	0.3~0.6	40%	0.6	15	1.5	Counter Clockwise	62*62	SMA-K	-55~+85ºC
11		HCCTA04T10G	0.4~1	10%	0.4	20	1.2	clockwise	46*46	N-K	-55~+85ºC
12		HCCTB04T10G	0.4~1	10%	0.4	20	1.2	Counter Clockwise	46*46	N-K	-55~+85ºC
13		HCCTA04T10G	0.4~1	10%	0.4	20	1.2	clockwise	46*46	SMA-K	-55~+85ºC
14		HCCTB04T10G	0.4~1	10%	0.4	20	1.2	Counter Clockwise	46*46	SMA-K	-55~+85ºC
15		HCCTA05T10G	0.5~1	40%	0.6	15	1.5	clockwise	46*46	SMA-K	-55~+85ºC
16		HCCTB05T10G	0.5~1	40%	0.6	15	1.5	Counter Clockwise	46*46	SMA-K	-55~+85ºC
17	P-S	HCCTA08T25G	0.8~2.5	10%	0.4	20	1.2	clockwise	25*25	N-K	-55~+85ºC
18		HCCTB08T25G	0.8~2.5	10%	0.4	20	1.2	Counter Clockwise	25*25	N-K	-55~+85ºC
19		HCCTA08T25G	0.8~2.5	10%	0.4	20	1.2	clockwise	25*25	SMA-K	-55~+85ºC
20		HCCTB08T25G	0.8~2.5	10%	0.4	20	1.2	Counter Clockwise	25*25	SMA-K	-55~+85ºC
21	L-S	HCCTA15T35G	1.5~3.5	10%	0.4	20	1.2	clockwise	19*19	SMA-K	-55~+85ºC
22		HCCTB15T35G	1.5~3.5	10%	0.4	20	1.2	Counter Clockwise	19*19	SMA-K	-55~+85ºC
23	S-C	HCCTA30T50G	3~5	10%	0.4	20	1.2	clockwise	21*25	SMA-K	-55~+85ºC
24		HCCTB30T50G	3~5	10%	0.4	20	1.2	Counter Clockwise	21*25	SMA-K	-55~+85ºC
25	C	HCCTA40T80G	4~8	10%	0.4	20	1.2	clockwise	17*27	SMA-K	-55~+85ºC
26		HCCTB40T80G	4~8	10%	0.4	20	1.2	Counter Clockwise	17*27	SMA-K	-55~+85ºC
27	X-K	HCCTA80T190G	8~19	10%	0.4	20	1.25	clockwise	13*26	SMA-K	-55~+85ºC
28		HCCTB80T190G	8~19	10%	0.4	20	1.25	Counter Clockwise	13*26	SMA-K	-55~+85ºC
29	K-Ka	HCCTA180T400G	18~40	10%	0.6	18	1.35	clockwise	10*25	2.92-K	-55~+85ºC
30		HCCTB180T400G	18~40	10%	0.6	18	1.35	Counter Clockwise	10*25	2.92-K	-55~+85ºC

 
Custom Design:
 

Applications:

 

Wireless Communication Base Station
 

Radar System
 

RF Circuit
 

Microwave Radio Systems
 

T/R Module
 

GPS
 

Cavity Filter
 

Public Address System Radio Transmitter
 

Satellite TV



 

Mounting instructions for microstrip Components:

Storage : Components must be kept in a dry and protected environment. (Such as nitrogen gas cabinet or drying cabinet).
Normal operation : In the purification environment, it is necessary to wear dust-free finger covers and use plastic head or bamboo tweezers to avoid colliding with the substrate and scratching the microstrip line during operation.
Cleaning treatment : The components can be cleaned in absolute ethanol, and can also be gently wiped with absolute ethanol cotton balls. It is strictly forbidden to clean in an ultrasonic cleaner.
Installation :
* Soldering process. The components installation is recommended to use the soldering material which melting temp. is ≤183 ºC. Such as solder paste Sn63Pb37 or solder sheet. Use the heating table for soldering. After the solder fully melted at 200ºC and remove the components. The continuous time should< 30 seconds.
* Adhesion process: Use less and smooth conducting resin. It is finished when conductive adhesive can be seen around the component after it is placed in the installation position and pressed tightly. The curing temperature is less than 140ºC for baking.
Port connection :

• Bonding method: Gold bonding wire is recommended to use 25μm, thermosonic bonding temperature is 100 ~ 150ºC, spherical bonding wedge pressure is 30 ~ 55gf, shaped bonding wedge pressure is 15 ~ 25gf.
• Tin soldering method: Place the box installed microstrip components on the 120 ºC heating box to preheat. It is recommended to use the soldering material which melting temp. is ≤183 ºC, preload the gold-plated copper foil connection line into a certain arc and lap coat the microstrip line with flux. Use the pointed soldering iron to solder the connection line in turn, soldering iron setting temperature is 210 ºC ~ 230 ºC,soldering time less than 2 seconds per time, solder as little as possible and keep solder joints smooth and round. Generally, we don't recommend soldering for lead wires.

Assembly diagram :
(1): The installation hole (slot) size of the components shall be controlled as follows: length x width x height.

(2): Unilateral assembly gap of components should be <0.05mm.